|
|
Zebra 220XiIIIPlus Thermal-Transfer Label Printer Specifications
Printing Method
Thermal-transfer or direct-thermal
Thermal Head
203 dpi (8 dots/mm)
300 dpi (dots/mm)
Label Width
Up to 8.8" (224mm)
Label Depth
Up to 39.0" (991mm)
Print Width
Up to 8.5" (216mm)
Print Speed
203 dpi: Programmable from 2.4" (61mm) to 10.0" (254mm) per second
300 dpi: Programmable from 2.4" (61mm) to 6.0" (152mm) per second
Bar Code Symbologies
Linear bar codes: Code 11, Code 39, Code 93, Code 128 (A, B, & C), UCC Case Codes, ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13, UPC and EAN 2 of 5 digit extensions, Plessey, POSTNET, Standard 2 of 5, Industrial 2 of 5, Interleaved 2 of 5, LOGMARS, MSI, Codabar
2D Bar Codes: Codablock, PDF-417, Code 49, DataMatrix, MaxiCode, QR Code
Available Character Heights
0.044" to 2.95"
(1.11mm to 74.9mm)
Available Character Widths
33.9 characters/inch maximum
Memory
• 16 MB standard RAM (expandable to 12 MB)
• Dual 32-bit RISC and CISC microprocessors
• PCMCIA Memory Card Interface
Operator Controls/Indicators
Power on/off, paper out, ribbon out, head open, take label, pause, feed, cancel; front panel
membrane switches permit control of communication parameters, burn temperature and printing parameters
Dimensions
15.65"W x 15.5"H x 19.5"D
(397.5mm x 393.7mm x 495.3mm)
Weight
72 lbs. (32.7kg) without options
Dual Media Sensors
• Transmissive
• Reflective
Communication Interface
• RS-232 serial interface
• High-speed parallel interface
• USB interface
Electrical
Auto-selectable 90-264 VAC; 48-62Hz
Environment
Operating temperature: 41°F to 104°F (5°C to 40°C)
Storage temperature: -4°F to 140°F (-20°C to 60°C)
Humidity: 20% to 85% non-condensing (operating)
5% to 85% non-condensing (storage)
Back to 220XiIIIPlus Printer page
|
Zebra 220XiIIIPlus Label Printer Brochure
