Zebra 140XiIIIPlus Thermal-Transfer Label Printer Specifications

Printing Method
Thermal-transfer or direct-thermal

Thermal Head
203 dpi (8 dots/mm)

Label Width
1.57" to 5.51"
(40mm to 140mm)

Label Depth
0.25" to 39.0"
(6.35mm to 991mm)

Print Width
Up to 5.04" (128mm)

Print Speed
Programmable from 2.4" (61mm) to 12.0" (305mm) per second

Bar Code Symbologies
Linear bar codes: Code 11, Code 39, Code 93, Code 128 (A, B, & C), UCC Case Codes, ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13, UPC and EAN 2 of 5 digit extensions, Plessey, POSTNET,
Standard 2 of 5, Industrial 2 of 5, Interleaved 2 of 5, LOGMARS, MSI, Codabar

2D Bar Codes: Codablock, PDF-417, Code 49, DataMatrix, MaxiCode, QR Code

Available Character Heights
0.044" to 2.95"
(1.11mm to 74.9mm)

Available Character Widths
33.9 characters/inch maximum

Memory
• 16 MB standard RAM (expandable to 12 MB)
• Dual 32-bit RISC and CISC microprocessors
• PCMCIA Memory Card Interface

Operator Controls/Indicators
Power on/off, paper out, ribbon out, head open, take label, pause, feed, cancel; front panel
membrane switches permit control of communication parameters, burn temperature and printing parameters

Dimensions
11.15"W x 15.5"H x 19.5"D
(283.2mm x 393.7mm x 495.3mm)

Weight
55 lbs. (25kg) without options

Dual Media Sensors
• Transmissive
• Reflective

Communication Interface
• RS-232 serial interface
• High-speed parallel interface
• USB interface

Electrical
Auto-selectable 90-264 VAC; 48-62Hz

Environment
Operating temperature:
41°F to 104°F (5°C to 40°C)
Storage temperature:
-4°F to 140°F (-20°C to 60°C)
Humidity: 20% to 85% non-condensing (operating)
5% to 85% non-condensing (storage)

Back to 140XiIIIPlus Printer page