Model 5300rfid Smart Label Printer-Applicator Specifications

Dimensions
29.92"L x 27.25"W x 28.25"H
(759mm x 692mm x 717mm)

Weight
174 lbs. (78.9kg)

Electrical
115 VAC, 60 cycle, 5 amps; overload protection built in; 220 VAC, 50 cycle optional

Communications Interface
RS 232-C; Centronics compatible

Air Requirements
3 cfm @ 90 psi

Product Sensing
Photo Electric

Printing Methods
Direct thermal or thermal-transfer

Supported Transponder Type
EPC Gen 2; upgradeable to support future protocols

Print Resolution
203 or 300 dpi, depending upon print engine-encoder

Print Speed
Up to 16" (406mm) per second, depending upon print-encode engine

Label Sizes
Up to 5.0"W x 6.0" L, depending upon print-encode engine
(127mm x 152.4mm)

Label Roll Size
Maximum 13.75" diameter (349.2mm)

Label Placement
Accurate to ±0.06" (1.5mm) when labels are produced to specifications and product handling is controlled and consistent

Labels
Die-cut, waste removed with 0.125" (3mm) minimum separation between labels in running direction and 0.125" (3mm) maximum web over label width

Labeling Software
Weber Legitronic^® Software

Bar Code Symbologies
UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix



Back to the 5300rfid page