Model 5300 Series Twin-Tamp Label Printer-Applicator Specs

Dimensions
29.92”L x 38.09”W x 28.25”H
(760mm x 967mm x 717mm)

Weight
Approximately 196 lbs. (88.9kg);
varies slightly with printer selected

Electrical
115 VAC, 60 cycle, 5 amps; overload
protection built-in
(220 VAC, 50 cycle optional)

Environmental
41-104°F (5-40°C); humidity 15-85% RH non-condensing

Air Requirements
5 cfm @ 90 psi

Product Sensing
Photoelectric

Printing Methods
Direct-thermal or thermal-transfer

Print Resolution
203 dpi (8 dots/mm) or
300 dpi (12 dots/mm)

Label Sizes
Minimum*: 2.0”W x 1.0”L
(50.8mm x 25.4mm)
Maximum*: 4.0”W x 6.0”L
(101.6mm x 152.4mm)

Print Area*
Up to 4.0”W x 6.0”L
(152.4mm x 101.6mm)

Print Speed*
Up to 16.0” (305mm) per second at 203 dpi
Up to 8.0” (203mm) per second at 300 dpi

Communications Interface
RS-232C; Centronics compatible

Print Characters and Bar Codes
Text: Eight fonts, including OCR A & B representation
Bar Codes: UPC A & E, EAN 8 & 13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland and others. Text and bar codes can be rotated in 90-degree increments

Label Roll Size
Standard 13.75” (349.3mm) diameter

Labeling Speed
Contingent upon printer selected, label size and label content

Label Placement
Accurate to ±0.03” (.76mm) when labels are produced to specifications and product handling is controlled

Labels
Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer

Labeling Software
Weber Print-Apply Software

Options
Choice of Datamax, Sato, Zebra print engines; heavy-duty stand


* Dependent on printer selected

Return to 5300 Twin-Tamp page