|
|
Model 5300 Label Printer-Applicator Specifications
Dimensions
29.92"L x 27.25"W x 28.25"H
(75.9cm x 69.2cm x 71.8cm)
Weight
174 lbs. (78.8kg)
Electrical
115 VAC, 60 cycle, 5 amps; overload protection built in
220 VAC, 50 cycle optional
Communication Interface
RS-232-C; Centronics compatible
 Air Requirements
3 cfm at 90 psi
Product Sensing
Photoelectric
Processor
Rabbit 3000 Microprocessor
Printing Methods
Direct-thermal and thermal-transfer
Print Resolution
203 or 300 dpi, dependent upon print engine selected
Print Area
Zebra 112*:
4.1"W x 6.0"L (104mm x 152.4mm)
Zebra 113*:
4.2"W x 6.0"L (107mm x 152.4mm)
Zebra R112 RFID:
4.1”W x 6.0”L (104mm x 152.4mm)
Zebra R113 RFID:
4.2”W x 6.0”L (107mm x 152.4mm)
Zebra 172:
6.6"W x 6.0"L (167.6mm x 152.4mm)
Zebra 173:
6.6"W x 6.0"L (167.6mm x 152.4mm)
Sato 8460SE:
6.0"W x 6.0"L (152.4mm x 152.4mm)
Sato 8485SE:
5.0"W x 6.0"L (127mm x 152.4mm)
Sato 8490SE:
4.4"W x 6.0"L (112mm x 152.4mm)
Sato S84 Series:
4.09"W x 6.0"L (104mm x 152.4mm)
Avery Dennison DPM Series:
4.17"W to 6.3"W x 6.0"L (106mm to 160mm x 152.4mm)
Print Speed & Resolution
Zebra 112*:
Up to 12.0" per second (305mm) @ 203 dpi
Zebra 113*:
Up to 8.0" per second (203mm) @ 300 dpi
Zebra 112R RFID:
Up to 12.0" per second (305mm) @ 203 dpi
Zebra 113R RFID:
Up to 8.0" per second (203mm) @ 300 dpi
Zebra 172:
Up to 12.0" per second (305mm) @ 203 dpi
Zebra 173:
Up to 8.0" per second (203mm) @ 300 dpi
Sato 8460SE:
Up to 8.0" per second (203mm) @ 203 dpi
Sato 8485SE:
Up to 12.0" per second (305mm) @ 203 dpi
Sato 8490SE:
Up to 8.0" per second (203mm) @ 300 dpi
Sato S84 Series
Up to 16", 14" or 6" per second (406mm, 355.5mm, 152.4mm) @ 203, 300 or 600 dpi
Avery Dennison DPM Series
Up to 15.75” per second (400mm) @ 300 dpi
Label Sizes
Zebra 112*:
Max 4.5"W x 6.0"L (114mm x 152.4mm)
Min 0.63"W x 0.5"L (158mm x 13mm)
Zebra 113*:
Max 4.5"W x 6.0"L (114mm x 152.4mm)
Min 0.63"W x 0.5"L (158mm x 13mm)
Zebra 112R RFID:
Max 4.5"W x 6.0"L (114mm x 152.4mm)
Min 0.63"W x 0.5"L (158mm x 13mm)
Zebra 113R RFID:
Max 4.5"W x 6.0"L (114mm x 152.4mm)
Min 0.63"W x 0.5"L (158mm x 13mm)
Zebra 172:
Max 7.1"W x 6.0"L (180.34mm x 152.4mm)
Min 3.0"W x 1.0"L (76.2mm x 25.4mm)
Zebra 173:
Max 7.1"W x 6.0"L (180.34mm x 152.4mm)
Min 3.0"W x 1.0"L (76.2mm x 25.4mm)
Sato 8460S:
Max 6.5"W x 6.0"L (165.1mm x 152.4mm)
Min 1.0"W x 0.25"L (25.4mm x 6.35mm)
Sato 8485SE:
Max 5.25"W x 6.0"L (133.3mm x 152.4mm)
Min 1.0"W x 0.25"L (25.4mm x 6.35mm)
Sato 8490SE:
Max 5.25"W x 6.0"L (133.3mm x 152.4mm)
Min 1.0"W x 0.25"L (25.4mm x 6.35mm)
Sato S84 Series:
Max 5.1"W x 6.0"L (129.5mm x 152.4mm)
Min 0.5"W x 0.6"L (12.7mm x 15.24mm)
Avery Dennison DPM Series
Max 5.3"W or 7.4"W x 6.0"L (136mm or 190mm x 152.4mm)
Min 0.64"W x 0.2"L (16.2mm x 5mm)
*RFID Upgradeable Models
Label Roll Size
Maximum diameter 13.75” O.D. (350mm)
Labeling Speed
Contingent upon print engine and label size/content
Label Placement
Accurate to ±0.03” (.76mm) when labels are produced to specifications and product handling is controlled and consistent
Labels
Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer
Labeling Software
Weber Legitronic® software
Print Characters & Bar Codes
Text: Selection of fonts, including OCR-A & B representation
Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix
(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)
Optional Features
- Adjustable Stand
- Quick-change tamp pad
- RFID upgradeable print engine**
- Label-on-pad sensor
- Product-presence sensor
- Beacon alert lights
** Zebra 112 & 113 only
Back to Model 5300
|
5300 Brochure
