Model 5300 Dual-Label Pallet Printer-Applicator Specifications

Dimensions
50.71”L x 27.25”W x 28.25”H
(128.8cm x 69.2cm x 71.7cm)

Weight
200 lbs. (90.7kgs.)

Electrical
115 VAC, 60 cycle, 5 amps; overload
Protection built in; 220 VAC, 50 cycle optional

Air Requirements
5 cfm @ 90 psi

Product Sensing
Photoelectric

Printing Methods
Direct thermal or thermal-transfer

Print Resolution*
203 dpi (8 dots/mm) or
300 dpi (12 dots/mm)Label Size*
Minimum*: 4.0”W x 4.0”L
(101.4mm x 101.4mm)
Maximum*: 6.5”W x 8.0”L
(165.1mm x 203.2mm)

Print Area*
Up to 6.0”W x 8.0”L
(152.4mm x 203.2mm)

Print Speed*
Up to 16.0” (406.4mm) per second at 203 dpi
Up to 8.0” (203mm) per second at 300 dpi

Communications Interface
RS-232C; Centronics compatible

Print Characters and Bar Codes
Text: Eight fonts, including OCR A & B representation
Bar Codes: UPC A & E, EAN 8 & 13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland and others. Text and bar codes can be rotated in 90-degree increments

Label Roll Size
Standard 13.75” (349.3mm) diameter

Labeling Speed
Contingent upon print engine, pallet size, conveyor speed and system proximityLabel Placement
Accurate to ±0.125” (3mm) when labels are produced to specifications and product handling is controlled. Accurate, repeatable label placement is dependent upon consistent product handling, which includes conveyor speed, product orientation, and maintaining a consistent distance between the applicator and the product.

Labels
Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer

Labeling Software
Weber Legitronic^® Software

Options
• Choice of Zebra Technologies, Sato and Datamax print engines
• Heavy-duty, adjustable stand

* Dependent on printer selected


Back to 5300 Dual-Label Printer-Applicatorl