Model 3138-N Label Printer-Applicator Specifications

Dimensions
28.7"L x 25.6"W x 23.3"H (728mm x 650mm x 592mm)

Weight
165 lbs. (75kg)

Electrical
115 Volts AC, 60 Hz, 5 amps
220 Volts AC, 50 Hz, 5 amps

Air Requirements
4 cfm at 90 psi for most applications

Product Sensing
Photoelectric

Printing Methods
Direct-thermal or thermal-transfer

Print Resolutions
203 dpi (8 dots/mm) or
300 dpi (12 dots/mm) or

Standard Label Sizes
Maximum 7.2"W x 7.0"L (184mm x 178mm)
(Printer dependent)

Print Speed
Up to 12.0" (305mm) per second
(Printer dependent)

Labeling Speed
Contingent upon label size, label content and printer selected

Label Placement
Accurate to ±0.03" (0.8mm) when labels are produced to specifications and product handling is controlled

Communication Interfaces
• RS-232C; Centronics compatible
• RS-422 Bi-directional IEEE
• RS-485 1284 Parallel
• Coax
• Twinax
• Ethernet
(Printer dependent and optional; must be selected at time of order)

Print Characters and Bar Codes
Text: Selection of fonts, including OCR A & B representation
Bar Codes: Code 39, Code 93, Code 128, Codabar, UPC A & E, EAN 8 & 13, Interleaved 2 of 5, Standard 2 of 5, Industrial 2 of 5, MSI, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix
(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)

Label Roll Size
Standard diameter 12.0" (305mm)
Optional diameter 17.0" (432mm)

Labels
Die-cut, waste removed with 0.125" (3mm) minimum separation between labels in running direction and 0.125" (3mm) maximum web over label width; direct or thermal-transfer media

Labeling Software
Weber Print-Apply Software

Standard Outputs
Ribbon Low, Media Out, Label Out, Label on Pad, Low label, Applicator Ready, System Error, Applicator Warning, Tamp Extend, End of Web, Unlabeled Products, Air Assist, Air Blast, Offline, Rewind Error, Print Power Down

Standard Inputs
Apply, Print Command, Applicator Enable/Inhibit Reprint Command

Optional Features
• 17” power unwind
• Label-on-pad detection
(Consult Weber for additional options)

Back to Model 3138-N Series page