Model 3138 Series Label Printer-Applicator Specifications

Dimensions
28.7"L x 25.6"W x 23.3"H (728mm x 650mm x 592mm)

Weight
165 lbs. (75kg)

Electrical
115 Volts AC, 60 Hz, 5 amps
220 Volts AC, 50 Hz, 5 amps

Air Requirements
4 cfm at 90 psi for most applications

Product Sensing
Photoelectric

Printing Methods
Direct-thermal or thermal-transfer

Print Resolutions
203 dpi (8 dots/mm) or
300 dpi (12 dots/mm) or

Standard Label Sizes
Maximum 7.2"W x 7.0"L (184mm x 178mm)
(Printer dependent)

Print Speed
Up to 12.0" (305mm) per second
(Printer dependent)

Labeling Speed
Contingent upon label size, label content and printer selected

Label Placement
Accurate to ±0.03" (0.8mm) when labels are produced to specifications and product handling is controlled

Communication Interfaces
• RS-232C; Centronics compatible
• RS-422 Bi-directional IEEE
• RS-485 1284 Parallel
• Coax
• Twinax
• Ethernet
(Printer dependent and optional; must be selected at time of order)

Print Characters and Bar Codes
Text: Selection of fonts, including OCR A & B representation
Bar Codes: Code 39, Code 93, Code 128, Codabar, UPC A & E, EAN 8 & 13, Interleaved 2 of 5, Standard 2 of 5, Industrial 2 of 5, MSI, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix
(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)

Label Roll Size
Standard diameter 12.0" (305mm)
Optional diameter 17.0" (432mm)

Labels
Die-cut, waste removed with 0.125" (3mm) minimum separation between labels in running direction and 0.125" (3mm) maximum web over label width; direct or thermal-transfer media

Labeling Software
Weber Print-Apply Software

Standard Outputs
Label Low, Label Out, Ribbon Low, Ribbon Out, Printer Error, Print End

Standard Inputs
Apply, Print Command, Applicator, Disable Reprint Command

Optional Features
• 17” power unwind
• Label-on-pad detection
• Tamp-back sensor
(Consult Weber for additional options)

Back to Model 3138 Series page