Model 3115 Pressure-Sensitive Label Applicator Specifications

Dimensions
33.5"L x 22.9"W x 30.5"H
(85cm x 58.2cm x 77.5cm)

Weight
145 lbs (65.7kg)

Electrical
115 VAC, 60 cycle, 5 amps; overload protection built-in (220 VAC, 50 cycle optional)

Electronics
Menu-driven microprocessor controlled

Air Requirements
2 cfm at 60 psi to 90 psi (only when optional imprinter is used)

Product Sensing
Photoelectric

Label Roll Size
12.0" O.D. (305mm) wound on
3.0"(76mm) I.D. core;
[up to 16" (406mm) with powered rewind option]

Label Styling Requirements
Die-cut, waste removed, with minimum of 0.125"(3mm) separation between labels in running direction

Label Placement Accuracy
Label placement to ±0.03" (0.8mm) when labels are produced to specifications and product handling is controlled

Standard Label Sizes*
7.13" wide (181mm); length dependent on application

Labeling Speed
1000 linear inches (25.4 meters) of web per minute standard; up to 2000 inches (50.8 meters) and 3000 inches (76.2 meters) per minute available.

Options
Right- or left-handed unit, low label alarm, web break alarm, imprinters, and powered unwind

*Other sizes available

Back to Model 3115 page