---

Need More Info?
Contact us to learn more and to tell us about your specific application.

---

Need Acrobat, QuickTime or Windows Media Player?
Click here.

Model 3114 Pressure-Sensitive Label Applicator Specifications

Dimensions
33.5"L x 21.8"W x 27.0"H
(85cm x 56.6cm x 68.6cm)

Weight
140 lbs (63.5kg)

Electrical
115 VAC, 60 cycle, 5 amps; overload protection built-in (220 VAC, 50 cycle optional)

Electronics
Microprocessor-controlled module

Power Supply
Completely solid-state; located in pullout module drawer

Air Requirements
4 cfm at 60 to 90 psi for most applications

Product Sensing
Photoelectric

Label Roll Size
12.0" O.D. (305mm) wound on 3.0"(76mm) core; [16" (406mm) with power driven unwind optional]

Label Styling
Die-cut, waste removed with minimum of 0.125" (3mm) separation between labels in running direction

Label Placement Accuracy
Placement can be held to ±0.03" (0.8mm) when labels are produced to specifications and product handling is controlled

Standard Label Sizes*
Maximum- 4.13"W x 5.5"L (105mm x 140mm)
Minimum- 0.63"W x 0.38"L (16mm x 10mm)

Labeling Speed
Up to 1500 linear inches (38.1 meters) of label web per minute
Up to 2000 linear inches (50.8 meters) optional

Application Method
Tamp-blown

Options
Reverse vacuum blow, inverted tamp blow, hot stamp imprinters, snorkels, low label alarm, web break alarm, label counter, right- or left-handed unit.

*Other sizes available
 
Back to Model 3114 page