Model 2600 Series Label Printer-Applicator Specifications

Dimensions
28.42”L x 22.09”W x 25.09”H (72.2cm x 56.1cm x 63.7 cm)

Weight
110 lbs. (49.9kg)

Electrical
115 VAC, 60 cycle, 5 amps; overload protection built in; 220 VAC, 50 cycle optional

Communication Interface
RS-232-C; Centronics compatible

Air Requirements
3 cfm at 90 psi

Product Sensing
Photoelectric

Printing Methods
Direct-thermal or thermal-transfer

Print Resolution
203- or 300-dpi, dependent upon print engine selected

Label Sizes
Max 4.5”W x 6.0”L (114.3mm x 152.4mm)
Min 1.0”W x 1.0”L (25.4mm x 25.4mm)

Print Speed & Resolution
• Sato 8485SE: Up to 12.0” (305mm) per sec @ 203 dpi
• Sato 8490SE: Up to 8.0” (203mm) per sec @ 300 dpi
• Zebra 112: Up to 12.0” (305mm) per sec @ 203 dpi
• Zebra 113: Up to 8.0” (203mm) per sec @ 300 dpi

Label Roll Size
Maximum diameter 12.0” (305mm)

Labeling Speed
Contingent upon label size/content

Label Placement
Accurate to ±0.06” (1.5mm) when labels are produced to specifications and product handling is consistent and controlled

Labels
Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer

Software
Weber Print-Apply

Print Characters & Bar Codes
Text: Selection of fonts, including OCR-A & B representation
Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix, others

(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)

Optional Features
• Adjustable stand
• Variable stroke sensor
• Label-on-pad sensor
• Low-label sensor
• Vacuum shut-off
• Low-pressure detection
• Strobe light

Back to the 2600 Series Printer-Applicator