Brochure
Model 5300
Printer-Applicator
(pdf)
Videos
Model 5300 Tamp-Blow
Label Printer-Applicator
Print-Apply in Reels Up
Configuration
Swing-Tamp Print-Apply at Automated Distribution Center
Print-Apply
with Integrated KDU
Print-Apply with Top &
Bottom Wipe Modules
Side Print-Apply
at Distribution Center
Model 5300 Label Printer-Applicator Specifications Dimensions 29.92"L x 27.25"W x 28.25"H (75.9cm x 69.2cm x 71.8cm) Weight 174 lbs. (78.8kg) Electrical 115 VAC, 60 cycle, 5 amps; overload protection built in 220 VAC, 50 cycle optional Communication Interface RS-232-C; Centronics compatible Air Requirements 3 cfm at 90 psi  Product SensingPhotoelectric Processor Rabbit 3000 Microprocessor Printing Methods Direct-thermal and thermal-transfer Print Resolution 203, 300 or 600 dpi, dependent upon print engine selected Max Print Width • Zebra 112*: 4.1” (104mm) • Zebra 113*: 4.2” (107mm) • Zebra R112 RFID: 4.1” (104mm) • Zebra R113 RFID: 4.2” (107mm) • Zebra 172: 6.6” (167.6mm) • Zebra 173: 6.6” (167.6mm) • Sato 8460SE: 6.0” (152.4mm) • Sato 8485SE: 5.0” (127mm) • Sato 8490SE: 4.4” (112mm) • Sato S84 Series: 4.09” (104mm) • Datamax A-4212: 4.094” (104mm) • Datamax A-4310: 4.161” (105.7mm) • Datamax A-4606: 4.157” (105.6mm) • Datamax A-6212: 6.614” (168mm) • Datamax A-6310: 6.401” (162.6mm) Print Speed & Resolution • Zebra 112*: Up to 12.0” per second (305mm) @ 203 dpi • Zebra 113*: Up to 8.0” per second (203mm) @ 300 dpi • Zebra 112R RFID: Up to 12.0” per second (305mm) @ 203 dpi • Zebra 113R RFID: Up to 8.0” per second (203mm) @ 300 dpi • Zebra 172: Up to 12.0” per second (305mm) @ 203 dpi • Zebra 173: Up to 8.0” per second (203mm) @ 300 dpi • SATO 8460SE: Up to 8.0” per second (203mm) @ 203 dpi • SATO 8485SE: Up to 12.0” per second (305mm) @ 203 dpi • SATO 8490SE: Up to 8.0” per second (203mm) @ 300 dpi • SATO S84 Series: Up to 16”, 14” or 6” per second (406mm, 355.5mm, 152.4mm) @ 203, 300 or 600 dpi • Datamax A-4212: Up to 12.0” (305mm) per second @ 203 dpi • Datamax A-4310: Up to 10.0” (254mm) per second @ 300 dpi • Datamax A-4606: Up to 6.0” (152mm) per second @ 600 dpi • Datamax A-6212: Up to 12.0” (305mm) per second @ 203 dpi • Datamax A-6310: Up to 10.0” (254mm) per second @ 300 dpi Label Width Range • Zebra 112*: Max 4.5” (114mm); Min 0.63” (16mm) • Zebra 113*: Max 4.5” (114mm); Min 0.63” (16mm) • Zebra 112R RFID: Max 4.5” (114mm); Min 0.63” (16mm) • Zebra 113R RFID: Max 4.5” (114mm); Min 0.63” (16mm) • Zebra 172: Max 7.1” (180.34mm); Min 3.0” (76.2mm) • Zebra 173: Max 7.1” (180.34mm): Min 3.0” (76.2mm) • Sato 8460S: Max 6.5” (165.1mm); Min 1.0” (25.4mm) • Sato 8485SE: Max 5.25” (133.3mm); Min 1.0” (25.4mm) • Sato 8490SE: Max 5.25” (133.3mm); Min 1.0” (25.4mm) • Sato S84 Series: Max 5.1” (129.5mm); Min 0.5” (12.7mm) • Datamax A-4212: Max 4.65” (118mm); Min 1.0” (25mm) • Datamax A-4310: Max 4.65” (118mm); Min 1.0” (25mm)) • Datamax A-4606: Max 4.65” (118mm); Min 1.0” (25mm) • Datamax A-6212: Max 6.7” (170mm); Min 2.0” (50mm) • Datamax A-6310: Max 6.7” (170mm); Min 2.0” (50mm) *RFID Upgradeable Models Label Roll Size Maximum diameter 13.75” O.D. (350mm) Labeling Speed Contingent upon print engine and label size/content Label Placement Accurate to ±0.03” (.76mm) when labels are produced to specifications and product handling is controlled and consistent Labels Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer Labeling Software Weber Legitronic® software Print Characters & Bar Codes Text: Selection of fonts, including OCR-A & B representation Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix (Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion) Optional Features
** Zebra 112 & 113 only |