Model 4300 Pro-Apply Label Printer-Applicator Specifications
Dimensions
28.92”L x 27.49”W x 22.45”H (73.5cm x 69.8cm x 57 cm)
Weight
110 lbs. (49.9kg)
Electrical
115 VAC, 60 cycle, 5 amps; overload protection built in; 220 VAC, 50 cycle optional
Communication Interface
High-speed serial interfaces: RS-232C and RS-422 with DB9F connector; RS-485 multi-drop capability; Zebra Net 10/100 print server
Air Requirements
3 cfm at 90 psi
Product Sensing
Photoelectric
Printing Methods
Direct-thermal or thermal-transfer
Print Resolution
203-, 300- or 600-dpi, dependent upon print engine selected
Label Sizes
Max 6.0”W x 6.0”L (152.4mm x 152.4mm)
Min 0.625”W x 0.625”L (15.9mm x 15.9mm)
Tamp-Pad Sizes
4” x 4”, 4” x 6”, 6” x 4” and 6” x 6”
Print Speed & Resolution
• Zebra 112*: Up to 12.0” per second (305mm) @ 203 dpi
• Zebra 113*: Up to 8.0” per second (203mm) @ 300 dpi
• Zebra 112R RFID: Up to 12.0” per second (305mm) @ 203 dpi
• Zebra 113R RFID: Up to 8.0” per second (203mm) @ 300 dpi
• Zebra 172: Up to 12.0” per second (305mm) @ 203 dpi
• Zebra 173: Up to 8.0” per second (203mm) @ 300 dpi
• SATO 8460SE: Up to 8.0” per second (203mm) @ 203 dpi
• SATO 8485SE: Up to 12.0” per second (305mm) @ 203 dpi
• SATO 8490SE: Up to 8.0” per second (203mm) @ 300 dpi
• SATO S84 Series: Up to 16”, 14” or 6” per second (406mm, 355.5mm, 152.4mm) @ 203, 300 or 600 dpi
• Datamax A-4212: Up to 12.0” (305mm) per second @ 203 dpi
• Datamax A-4310: Up to 10.0” (254mm) per second @ 300 dpi
• Datamax A-4606: Up to 6.0” (152mm) per second @ 600 dpi
• Datamax A-6212: Up to 12.0” (305mm) per second @ 203 dpi
• Datamax A-6310: Up to 10.0” (254mm) per second @ 300 dpi
Label Roll Size
Maximum outside diameter 12.0” (305mm)
Labeling Speed
Contingent upon label size/content
Label Placement
Accurate to ±0.03” (0.8mm) when labels are produced to specifications and product handling is consistent and controlled
Labels
Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer
Software
Weber Legitronic
Print Characters & Bar Codes
Text: Selection of fonts, including OCR-A & B representation
Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix, others
(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)
Optional Features
• Adjustable stand
• Variable stroke sensor
• Label-on-pad sensor
• Low-label sensor
• Vacuum shut-off
• Low-pressure detection
• Strobe light
Back to the Model 4300 Label Printer-Applicator
