Model 2600Lt Series Label Printer-Applicator Specifications

Dimensions
32.22"L x 21.50"W x 25.09"H
(81.9cm x 54.6cm x 63.7cm)

Weight
110 lbs. (49.9kg)

Electrical
115 VAC, 60 cycle, 5 amps; overload protection built in; 220 VAC, 50 cycle optional

Communication Interface
RS-232-C - standard
Parallel - optional
Ethernet - optional
Wireless - 802.11b optional
RS422/485 - optional

Air Requirements
3 cfm at 90 psi

Product Sensing
Photoelectric

Printing Methods
Direct-thermal or thermal-transfer

Print Resolution
203 dpi

Label Sizes
Max 4.25”W x 6.0”L (114.3mm x 152.4mm)
Min 1.125"W x .60"L (28.6mm x 15.2mm)

Print Speed
Up to 6 ips (152mm)

Label Roll Size
Maximum diameter 12.0” (305mm)

Labeling Speed
Contingent upon label size/content

Label Placement
Accurate to ±0.06” (1.5mm) when labels are produced to specifications and product handling is consistent and controlled

Labels
Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer

Software
Weber Print-Apply

Print Characters & Bar Codes
Text: Selection of fonts, including OCR-A & B representation
Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix, QR Code, VeriCode, others

(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)

Optional Features
• Adjustable stand
• Variable stroke sensor
• Label-on-pad sensor
• Low-label sensor
• Vacuum shut-off
• Low-pressure detection
• Strobe light

Back to the 2600Lt Series Printer-Applicator