Model 2600 Series Label Printer-Applicator Specifications Dimensions 28.42”L x 22.09”W x 25.09”H (72.2cm x 56.1cm x 63.7 cm) Weight 110 lbs. (49.9kg) Electrical 115 VAC, 60 cycle, 5 amps; overload protection built in; 220 VAC, 50 cycle optional Communication Interface RS-232-C; Centronics compatible Air Requirements 3 cfm at 90 psi Product Sensing Photoelectric Printing Methods Direct-thermal or thermal-transfer Print Resolution 203-, 300- ro 600-dpi, dependent upon print engine selected Label Sizes Max 4.5”W x 6.0”L (114.3mm x 152.4mm) Min 1.0”W x 1.0”L (25.4mm x 25.4mm) Print Speed & Resolution • SATO 8485SE: Up to 12.0” (305mm) per sec @ 203 dpi • SATO 8490SE: Up to 8.0” (203mm) per sec @ 300 dpi • Zebra 112: Up to 12.0” (305mm) per sec @ 203 dpi • Zebra 113: Up to 8.0” (203mm) per sec @ 300 dpi • Datamax A-4212: up to 12.0" (305mm) per sec @ 203 dpi • Datamax A-4310: up to 10.0" (254mm) per sec @ 303 dpi • Datamax A-4606: up to 6.0" (152mm) per sec @ 600 dpi Label Roll Size Maximum diameter 12.0” (305mm) Labeling Speed Contingent upon label size/content Label Placement Accurate to ±0.06” (1.5mm) when labels are produced to specifications and product handling is consistent and controlled Labels Die-cut, waste removed with 0.125” (3mm) minimum separation between labels in running direction and 0.125” (3mm) maximum web over label width; direct or thermal-transfer Software Weber Print-Apply Print Characters & Bar Codes Text: Selection of fonts, including OCR-A & B representation Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix, others (Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion) Optional Features • Adjustable stand • Variable stroke sensor • Label-on-pad sensor • Low-label sensor • Vacuum shut-off • Low-pressure detection • Strobe light Back to the 2600 Series Printer-Applicator |